In the early years, the choice of smart cameras limited to industrial and commercial applications has gradually entered our lives. Nowadays, with the construction of Ping'an City, security cameras are everywhere. With the development of science and technology, the security camera has als…… MORE
1. The plastic shell must be placed neatly in the box, and the number of each layer must be uniform. 2. Do not squeeze the plastic shell. Paper outer box packaging requires a certain distance between plastic shells, about 5mm. Avoid friction and scratching during handling. 3. Each layer …… MORE
In the processing of medical device shell, the first thing to do is to carry out blanking processing. When the good blanking is completed, the next process needs to be carried out. In this process, it needs to bend it. Bending accuracy can reflect the process accuracy of sheet metal proc…… MORE
Most of the burrs on the plastic shell of the power supply occur on the parting surface, that is, where the molten material flows into the place between the moving mold and the static mold, the sliding part of the slider, the gap of the insert, the hole of the ejector rod, etc., and redu…… MORE
The cracking of plastic injection products includes filiform cracks, microcracks, white tops and cracks on the surface of plastic shell, as well as the trauma crisis caused by part sticking and runner sticking. According to the cracking time, it can be divided into demoulding cracking an…… MORE
Shell shortage, also known as lack of glue, insufficient filling, insufficient injection, incomplete plastic shell, etc., is the most common problem we encounter in plastic shell injection molding every day, which is usually manifested in the end of the molding area and the position of f…… MORE
With the development of the times, plastic shell has been more and more deeply into our life. Many friends can't avoid using plastic shell to deal with various things, such as the protection of computer power supply, the protection of safety tools, and the shell of power bank we use is p…… MORE
With the continuous implementation of various epidemic prevention and control measures, although the total number of confirmed cases in the country is still on the rise, the data in other regions except Wuhan have begun to decline. At the same time, enterprises are returning to work in s…… MORE
During the injection molding process, the dents of the plastic shell are shrinkage dents generated after the plastic is cooled and hardened, which mainly appear in the thick wall of the plastic shell, ribs, shell, nut insert back, etc. 1、 Equipment: (1) insufficient feeding, serious wear…… MORE
The finished product quality and processing cost of injection mold are closely related to the quality of injection mold. Therefore, it is particularly important to judge the quality of injection mold before processing. How to judge the quality of an injection mold? Injection molding: how…… MORE
The shell of medical devices is usually manufactured by low-pressure pouring, which is produced by simple molds, such as aluminum mold, resin mold, ABS mold, etc. Resin molds are commonly used, because the cost of resin molds is lower than aluminum molds, and the speed of making molds is…… MORE
Omnidirectional injection molding is to inject the plastic melt into the middle of the closed mold cavity under high pressure, and then heat it to solidify, so as to obtain the plastic product exactly the same as the mold cavity. The following is a detailed explanation of the basic views…… MORE
